Shanklin A26A L-Bar Sealer Wrapper

Shanklin A26A L-Bar Sealer Wrapper
w/ Shanklin T-6XL Tunnel

Manufacturer: Shanklin
Model: A26A
Condition: Very Good

Dimensions:
OverallLength: 72
OverallWidth: 60
OverallHeight:55
Voltage: 230 Volt - 1 PH - 60 Hz @ 20 Amps

Description:
Fully automatic operation
Shanklin A26A accepts randomly spaced product, fed either automatically or by hand.
Model A-26A power advances the wrapping film while feeding product into the machine.
Product is conveyed into the machine through a film inverting head where it is wrapped in plastic film. Passing into the sealing area, it starts the discharge conveyor and film advance system, drawing the film and product into the sealing area. Once the product is correctly located in the sealing area, the conveyor stops, the infeed roller on the discharge conveyor retracts from the seal area and the sealing jaws make the seal. After sealing, the product is conveyed away, usually to a shrink tunnel. Simultaneously, the infeed roller extends to provide a smooth transfer for the next product.

Maximum product size of 15" wide x 21" long x 8" high
Minimum product size of 2-3/4" long x 3" wide
25 to 35 packages per minute
Up to 45 packages per minute (with High Speed Gearing)
Automatic scrap winder
Height adjuster crank to adjust the height of the seal jaw opening
230 V/ 1 Phase / 60 HZ at 20 Amp
Belt elevation from ground 40"High
Infeed belt 37"L x 17"W
Outfeed belt 40"L x 19 1/2"W

Shanklin T-6XL Tunnel

Manufacturer: Shanklin
Model: T-6XL
Condition: Very Good

Dimensions:
OverallLength:59
OverallWidth: 42
OverallHeight: 84
Voltage: 230 Volt - 3 PH - 60 Hz @ 36 FLA

Description:

Tunnel Opening 21"W x 8 3/4"H
Wire Mesh Belting 59"L x 15"W
Casters
Adjustable Height Settings from 28" to 40" top of belt
Variable 15 to 120 ft/min conveyor belt
Leeson 1/2 and 3/4 HP Motors

This machine is in very nice condition!

Was priced at...
$12,500.00

Now priced at...
$7,750.00

Additional or Larger Photos Available Upon Request

(see image above to see enlarged view)