|
Model |
SC-500 |
|
Printing/Cutting method |
Piezo ink-jet
method/media-moving method |
|
Printing/Cutting area |
1346.2 mm x 24998 mm (53 in.
x 984-1/8 in.) |
|
Acceptable material width |
130 to 1371 mm (5-3/16 to 54
in.)
(Note that detection of the front and rear edges is not
possible for material measuring from131 mm to 430 mm
(5-3/16 to 17 in.).) |
|
Conditions for usable
materials |
Cuttable material thickness:
0.08 to 0.22 mm (0.00315 to 0.00866 in.) (depending on
material composition) |
| Maximum cut
table material thickness including base paper: 0.4 mm
(0.0157 in.) |
|
Maximum printable material
thickness including base paper: 1.0 mm (0.039 in.) (when
head is raised to maximum) |
| Maximum
diameter for roll material: 180 mm (7-1/16 in.) |
|
Core inner diameter for roll
material: 50.8 mm (2 in.) or 76.2 mm (3 in.) |
| Maximum
weight for roll material: 20 kg (44.1 lb.) |
|
Ink cartridges |
Type |
Exclusive SOL INK cartridge |
|
Capacity |
220 cc ±5 cc |
|
Color |
Six colors: cyan, magenta,
yellow, black, light cyan and light magenta |
|
Printing resolution
(Printing dot resolution) |
1440 dpi x 720 dpi / 720 dpi
x 720 dpi / 540 dpi x 540 dpi / 360 dpi x 720 dpi / 180
dpi x 720 dpi |
|
Acceptable tool |
Cutter
(blade and blade holder): Special blade for CAMM-1
series |
|
Cutting speed / force /
offset |
10 to 600 mm/s (10 to 300
mm/s in the material-feed direction) / 30 to 200 gf /
0.000 to 1.500 mm (0 to 0.0591 in.) |
|
Software resolution (When
cutting) |
0.025
mm/step (0.00984 in./step) |
|
Distance accuracy (When
cutting) |
Error of
less than ±0.4% of distance traveled, or 0.3 mm,
whichever is greater |
|
When distance correction has
been performed (when the setting for [CALIBRATION] -
[CUTTING ADJ.] has been made): |
| Error of
less than ±0.2% of distance traveled, or 0.1 mm,
whichever is greater |
|
Repetition accuracy (When
cutting) |
0.1 mm or
less (excluding stretching/contraction of the material)
Range for assured repetition accuracy
For materials with a width exceeding 610 mm (24 in.):
Length 4,000 mm (157-7/16 in.)
For materials with a width of 610 mm (24 in.) or less :
Length 8,000 mm (315-15/16 in.) |
|
Repetition between printing
and cutting |
±0.5mm (0.0197in.) max. at
25°C (0 °F)
(excluding possible shift caused by
expansion/contraction of the material and/or by
reloading the material,
and provided that material length is under 3000 mm
(118-1/16 in.) |
|
Software |
Roland
ColorChoice™ Adobe® PostScript® 3, Multi platform RIP
driver (Windows 98/NT/2000/XP, MacOS 9) |
|
Interface |
Bidirectional parallel interface (compliant with IEEE
1284: nibble mode) |
|
Power consumption |
Printing/Cutting mode |
Maximum: 1.0A/100V to 240V
±10% 50/60 Hz |
|
Standby mode |
Maximum:
0.4A/100V to 240V ±10% 50/60 Hz |
|
Acoustic noise level |
Printing/Cutting mode |
64dB (A) or less (According
to ISO7779) |
|
Standby mode |
40dB (A) or
less (According to ISO7779) |
|
Dimensions |
With stand |
2325 mm [W] x 736 mm [D] x
1287 mm [H] (91-9/16 in. [W] x 29 in. [D] x 50-11/16 in.
[H]) |
|
Weight |
With stand |
105 kg (231.5 lb.) |
|
Environment |
Power on |
Temperature: 15 to 35 °C (59
to 95 °F), Humidity: 35 to 80 % (non-condensing) |
|
Power off |
Temperature:
5 to 40 °C (41 to 104 °F), Humidity: 20 to 80 %
(non-condensing) |
|
Accessories |
Power cord / Drain bottle /
Drain bottle cap / Blade / Blade Holder / Replacement
blade for separating knife / Cleaning kit / Roland
ColorChoiceTM RIP driver / User's manual |
